California Instruments 3000iL, User Manual

Page: 44 / 100

iL Series User Manual
34
Rev B California Instruments
Shift Phase Press this key to access the phase menu list.
Display Command Function Phase
selectable
PHASE <value>
Set immediate output phase. yes
PHASE:T <value>
Set triggered output phase. yes
PHASE:M <char>
Select the phase mode. yes
(FIXED, STEP, PULSE or LIST)
Table 20 : Phase control display readouts
Shape Press this key to access the shape menu list.
Display Command Function Phase
selectable
SHAPE <char>
Select the immediate output wave shape.
(SINE, SQUARE, or CSIN) CSIN = clipped
sine wave. User-defined waveshapes will
also appear in this list when created. yes
SHAPE:T <char>
Select the triggered output wave shape.
(SINE, SQUARE, or CSIN) CSIN = clipped
sine wave. User-defined waveshapes will
also appear in this list when created. yes
SHAPE:M <char>
Select the shape mode (FIXED, STEP,
PULSE or LIST). no
CLIP <value>
Set the clipping level of the CSIN wave
shape. This specifies the point where
clipping starts as a percentage of the peak
amplitude or percentage of THD. no
Table 21 : Waveform control display readouts
Notes:
value
= a numeric value
char
= a character string parameter
s
and
t
scroll through the command list.
↑
and
↓
scroll through the parameter list.
Pulse Press this key to access the pulse menu list.
Display Command Function
WIDTH <value>
Set the pulse width.
COUNT <value>
Set the number of output pulses.
DCYCLE <value>
Set the pulse duty cycle as a percentage of pulse period.
PER <value>
Set the pulse period.
HOLD <char>
Select parameter that will be held constant as the other
parameters change (
WIDTH
or
DCYCLE
).
Table 22 : Pulse menu display readouts
Shift Output Press this key to access the output menu list.