12
DIGEST Button [27]
Press this button during VCD 2.0 higher playback, 9 frames will appear on screen, use numeric buttons (0 to 9)
or
/
/
/
cursor buttons to choose one frame. Then press ENTER to start playing from the selected
frame.
PBC Button [26]
This button is used to set PBC function to ON and OFF. When PBC is "OFF", the system will display the menu
of VCD. Use Number Buttons ( 0 to 9, +10 ) to make your selection. When PBC is "ON" the system will be in
sequential play mode.
VOLUME UP/DOWN Buttons (
/
) [23]
These buttons control volume level.
DVD Player Operation
This chapter describe how to play a DVD, CD or VCD. Depending on the DVD or VCD, some operations may
be different or restricted. Refer to the instructions supplied with your DVD or VCD disc.
Each disc placed into the DVD Player has a built-in use interface that allows you to explore the information on
the disc, such as the title and chapter information. In order to access that information, you must use the remote
control or front panel. The following sections describe the relationship of the remote buttons to the disc menu
interface. There are a number of scenarios associated with remote button requests, some of which will, in fact,
result in a Not Valid (
) response. Example; you press the CHAPTER button during playback mode. This
button has no meaning here and will result a Not Valid message being displayed.
The DVD Player has a wide range and complete set of functions that it can perform. Some of these functions
can be activated from front panel keypad, but most of them can only be accessed from the IR remote control,
therefore, the following instructions describe the functions of the remote control only.
Preparation
•
Turn on the TV and select the video input source connected to the unit.
•
When you want to enjoy the sound of disc from the audio system, turn on the audio system and select the
input source connected to the unit.
•
Set the TV screen type correctly to match your TV.
PLAYING DISCS
1. Press the POWER button of the main unit
The player enters the standby mode and the STANDBY indicator above the POWER button lights up in red.
2. Press the POWER button on the remote control
•
The player enters the operation mode and the STANDBY indicator above the POWER button will turn off
and LCD will turn on.
•
Each time the POWER button on the remote control is pressed, the unit toggle between the operating
mode and the standby mode.
3. Press the OPEN/CLOSE to open the disc tray.
