Caliber AN-3012, User Manual

Page: 7 / 29

Wiring diagram
Video output socket 1 (Yellow)
Radio antenna socket
Video output socket 2 (Yellow)
FUSE 15A
Video input connector o car rear view camera (Yellow) t
AV2
RCA connector to left AUX audio input (White)
RCA connector to AUX right audio input (Red)
Video input connector (Yellow)
Subwoofer output connector (Green)
WHITE
WHITE / BLACK
GREEN
GREEN / BLACK
VIOLET
VIOLET / BLACK
GREY
GREY / BLACK
FRONT
4 ohm
LEFT
SPEAKER
REAR
4 ohm
RIGHT
SPEAKER
MEMORY B+ (YELLOW)
ACC B+ (RED)
POWER
B+ (
)
ANTENNA CONTROL
BLUE
FRONT
4 ohm
REAR
4 ohm
PARKING BRAKE WIRE B
(
)
-
PINK/BLACK
GROUND B- (BLACK)
REVERSING CAMERA
ACTIVAION WIRE B+ (PINK)
In order to make the unit work best, be sure to strictly follow the below connection!
the ends of the unused with the electrical
covering
The idle audio and video plugs make sure to remain the insulation covering to prevent
short circuit, or occurs some interfere or burned the unit.
Ensure insulate all the exposed cable or lead
, avoid short circuit.
The “PINK/BLACK PARKING BRAKE” wire must be connected to the parking brake system of
your vehicle. The unit will only play videos when the parking brake system is engaged, if the
parking brake system is not engaged, the TFT screen will display the message “
”. This is a safety feature designed to prevent the driver from watching a
video while driving. The video output of this unit is not affected by this.
Note:
In radio, disc playing mode, the images will be displayed on the screen whether or not the
parking brake system is engaged.
DISABLED
WATCH VIDEO
Connecting the parking brake wire to the vehicle’s parking brake system
15
RCA connector to front left audio output (White)
RCA connector to front right audio output (Red)
RCA connector to rear right
audio output (Red)
RCA connector to rear left
audio output (White)