Caliber AN-3012, User Manual

Page: 11 / 29

3. Closing the cover
Gently push in the holder until securely
locked into place.
2. Replacing the battery
Replace the battery with the same type
and the (+) side facing up.
Adjusting the volume level
ESP function
Press the or button on the front
panel, or use the or button on
the remote control to adjust volume level.
access the source selecting interface:
Then you can switch between the current
playback mode and the source interface,
so that you can select the source:
RADIO, AV2, DVD, USB
AV1, BT by pressing the /
or / button on the front panel or
pressing the / , / or button
on the remote control.
- During disc, USB, SD/MMC card
VOL+ VOL-
Anti-theft LED Indicator
Mute on/off
Designed as a theft deterrent, the red
LED will flash when the unit is turned off
and the front panel is removed.
When the unit is switched on, press the
button to turn off the sound
instantly. Press the again to return
it to the prior sound level.
MUTE
MUTE
This unit has the electronic shockproof
feature. So that if the unit skips due to
rough road conditions, the music or video
will be uninterrupted. This time of the
buffered content varies depending on the
disc type:
In power on mode, press button to
(with USB device
inserted), SD /MMC(with SD/MMC card
inserted),
◄ ► ▲/▼
- During disc, USB, SD/MMC card
playback, press and hold the
button to turn off the unit, when you next
switch on it, the unit will resume playing
from the point that it was interrupted.
To select playback mode
Last position memory feature
MODE
POWER
General operations
Reset the unit
Power on/off
Operating the unit for the first time, after
replacing the car battery or changing the
connections, you must reset the unit.
1.Turn off the unit power.
2.Press the
( ) button and
remove the front panel, then press the
button with a ballpoint or similar
object to restore the unit to the original
factory settings.
In power off mode, switch on the unit by
pressing any button except the
button and the
( ) button or
inserting a disc to disc slot USB device
to USB port or SD/MMC card to card slot.
When the system is on, press and hold
the
( ) button long to turn off
the unit.
OPEN
RESET
OPEN
EJECT
,
POWER