Caliber AN-3012, User Manual

Page: 21 / 29

BT menu
PRE 0
REC 0
DIA 0
MISS 0
AUTO OFF
DEFAULT
BT
Bluetooth hands-free function
When link up your mobile phone to this
bluetooth hands-free system, you can dial
or receive calls via this blutetooth device
during driving.
You can also transmit the audio data(music)
from a mobile phone to the DVD tuner via
this blutetooth device.
Sound and picture will be automatically off
when there is an in-coming call. Voice
comes out from your car speakers and the
built-in microphone receives your voice.
(See the menu of the hands-free system)
Before you use bluetooth free-hands
system, between this bluetooth free-hands
system and your bluetooth mobile phone
must be connected with each other. This
process is called “Pairing”.
1.Turn your bluetooth mobile phone on and
activate pairing mode. Now your bluetooth
mobile phone searches for bluetooth
devices in the reception range. When
mobile phone detect the hands-free sytem,
the “ANSON BT”(name of the free-hands
system) will appear on the screen of the
mobile phone
2. Once the bluetooth free-hands was
found, please enter the pairing code “0000”
to connect both devices with each other.
When you turn off the ACC power of the car,
then turn it on again, the bluetooth module
can establish bluetooth connection
automatically
If connecting success, the text “CON OK”,
“CONNTED” will be visible on the TFT LCD
display, and the “BT” will be shown the TFT
LCD display continuously. Otherwise, it will
appear “CONT DOWN”, “NO PAIRED” on
the TFT LCD display. Meanwhile, the “BT”
will twinkle continuously on the TFT LCD
display.
You have to active automatic call
reception so that the mobile phone
accepts incoming calls automatically
. In
many countries, this is a prerequisite for
legal operation of hands-free equipment
while driving.
1. Pairing
2. CONNECT
.
3. DIAL CALL
0~9 , #
*
+
DEL
4. Caller ID
5. Accepting an incoming call
6.Rejecting an incoming call
7. Terminating a call
8. Call Transfer
9. BT MENU
BT
MENU
3.1 Dial with the mobile phone directly.
3.2 Dial with the remote controller.
3.2.1 After connecting, press the “
” or
push button on the remote control to enter
telephone number .
- Pressing and holding the
button on the
remote control when you want to input “ + ”.
- Simultaneously, the entered number will
be appeared on the TFT LCD display.
- If a number is wrongly input, press the
button on the remote control to delete
the incorrect number.
3.2.2 Press the “
” button on the front
panel or remote control to dial.
When a ring comes, the caller ’s numbers
will be shown on the TFT LCD display, you
can decide whether or not to answer, so you
avoid unnecessary trouble and disturb.
If the automatic call accept function is not
activated,when a ring comes, press the “
”
button on the front panel or remote control
to switch on the calling.
When a ring comes, press the “ ” button
on the front panel or remote control to reject
the coming call.
During a phone call, press the “ ” button
on the front panel or remote control to hang
up the current call.
During a phone call, you can transfer the
call to your mobile phone or the hands-free
system by pressing the “
” button on the
front panel or remote control.
During connectting status, press the
button on the remote control to enter
bluetooth menu. The structure of the blue
tooth menu as follows: