The actual MIB file defining the sat-nms LFTXRX Optical Link private MIB may be downloaded
from the unit itself by FTP (user 'service', password 'service'). The file 'LFTXRX.MIB' contains all
necessary information. A link to this MIB file is also included in the web interface on the 'setup
page'.
The table below shows the complete list of M&C parameters the sat-nms LFTXRX chassis knows.
For each parameter the valid range and a short description is given.
Common status queries and commands
Info related commands
name
range/format
description
snom
r/o
Device serial
svrm
r/o
Software version
atpm
r/o
[card1],..,[card20]
: 0,1
Attenuator present of each slot (1=installed, 0=not
installed)
remm
r/o
[card1],..,[card20]
: 0,1
Remote (1) or Local (0) setting of each card
rdsw
r/w
[card1],..,[card20]
: 0,1
Redundancy switched indication of each slot (1=has
switched, clear with set to 0)
Setup related commands
name
range/format
description
addr
r/o
A,B,C,D,E,F,G,none
RS232 communication
address
baud
r/o
DISABLED,9600,19200,38400,57600,115200
Interface baudrate
time
r/o
YYYY:MM:DD hh:mm:ss
Date / time
stim
o/w
YYYY:MM:DD hh:mm:ss
Set date / time
ipt1
r/w
aaa.bbb.ccc.ddd
SNMP Trap IP 1
ipt2
r/w
aaa.bbb.ccc.ddd
SNMP Trap IP 2
ipt3
r/w
aaa.bbb.ccc.ddd
SNMP Trap IP 3
ipt4
r/w
aaa.bbb.ccc.ddd
SNMP Trap IP 4
notm
r/o
Description/Note
Config related commands
name
range/format
description
plcm
r/o
[card1],..,[card20] :
Card type of each slots
(C) 2021, SatService GmbH
www.satnms.com
LF20-UM-2107 Page 34/43
