- Insert the day turning the knob
- Press the knob to confirm the day set
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
- Enter the month turning the knob
- Press the knob to confirm the month set
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
- Enter the year turning the knob
- Press the knob to confirm the year set
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
During the date and time configuration, the device performs the full
scale and zero acquisition, and after the year has been confirmed,
the device enters in water mixing mode and the following screen is
displayed.
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
IMPORTANT: Completing the date and time setting, the
device starts the water mixing function with the default
parameters (table on page 8). If the probe T2 is not
connected, the relevant alarm is triggered. If the initial
parameters have not been confirmed, the device does not
perform the disinfection.
Operating status
During the operation of the device, the following work states can be
displayed:
1 - Reached setpoint
2 - Adjustment in progress
3 - Disinfection in progress
4 - Thermal shock in progress
5 - Zero and full scale acquisition
The LCD display indicates the device status, as shown in the following
screens.
1 - Reached setpoint:
Water mixing with set point reached. Motor stopped.
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
2 - Adjustment in progress:
a) Water mixing with temperature rise. Motor opening indicated by the
following symbols.
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
b) Water mixing with temperature decrease. Closed motor indicated by
the following symbols.
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
c) Reaching the closing limit switch and T1> TSET. The mixer can
not reach the set value, even though it is in the maximum closing
position; therefore the following symbol is displayed.
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
3
