2
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
1
22
3
1
Front panel
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
1) LED indicators:
2) LCD display:
green LED on:
mains LED
fixed red LED:
disinfection in progress, acquisition of full
scale and thermal shock in progress:
potentially hazardous condition
red flashing LED:
alarm condition
Display when switched on
When the device is switched on, the green LED lights up and the
following screen appears on the display.
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
It is necessary to check the presence of the battery in the appropriate
seat. Before carrying out this check, remove electric supply, check that
the battery is properly fitted, reconnect the electric supply, and confirm
pressing the knob, when the previous screen reappears. When the
device is switched on again, the red LED will stop flashing.
Important: If the battery is not inserted or it is low, the
appliance will still work, but in the event of a power failure
the time will not be saved.
It is recommended to refer to the alarm section in
this manual. (For correct battery installation, see the
"Installation and commissioning manual", supplied in the
package).
When the battery checks are completed, the device time and date
configuration starts.
Use the knob to change the values and press to confirm.
- Enter the time turning the knob
- Press the knob to confirm the time set
- Enter the minutes turning the knob
- Press the knob to confirm the minutes set
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
1) Warning signal
2) "Installer menu" block
3) SET temperature not reached
4) Maintenance
5) Manual
6) Disinfection/thermal shock not performed
7) Motor in operation
8) No mains voltage
9) Functional parameters
10) Outlets and inlets
11) Motor movement
12) Days of the week/time bands
13) Clock
3) Control knob
Turning the knob scrolls through the menus.
Pressing the knob confirms the selected values (depending on
the pressing time it is possible to access several work screens.
See page 9).
file originale
1
2
3
4
5
6
7
8
9
10
11
12
13
After about 2 seconds, the battery control screen will appear on the
display.
Date and time configuration
