background image

The strainer is fixed on a wooden pallet. An external carton with cover protects the strainer in order to prevent damage that could occur during 
handling. The packaging is single-use and must be disposed of according to the indications provided for by the regulations in force.
Before any movement, make sure that the elements used for transport (trolleys, bridge cranes, nylon straps, ropes, etc.) are in perfect working order 
and can withstand loads of not less than 100 kg.
The strainer must be lifted respecting the indications provided.
Move body and hands away when the strainer is lowered. Failure to follow these instructions could result in serious injury.
For no reason the personnel is authorized to pass under the load or near it, not even the signalman who will provide assistance to the movements. 
Do not tilt or overturn the pallet.

The manufacturer declines any responsibility related to this phase that must be carried out by personnel 
specialized on handling industrial machinery (wheelers, boaters), equipped with the necessary personal 
protective equipment (overalls, safety shoes, work gloves, hard hat, goggles).
The movement must take place slowly, under suitable lighting conditions, with suitable free space in the 
installation area.

Important! It is forbidden to handle the strainer with methods other than those indicated in the following document. Failure to comply with 
these conditions could cause serious injury to the user

8.1 Instructions for unpacking

First open the cover and then the cardboard side, then remove the pallet with the strainer.

8.2 Storage

Do not overturn or tilt the package.

Multiple packages can not be stacked. Do not place any weight on top of the packaging.

8.3 Reception

The packaging consists of appropriate material and prepared by expert personnel: the devices therefore are sent with all their parts and in perfect 
condition.
However, to check the quality of the transport services and in case the packaging is insured, follow the instructions below:
•  upon receipt, before unpacking, check if the box is damaged, in which case collect the goods accepting them conditionally, producing photographic 

evidence of the apparent damage.

•  check that the components of the device have not been damaged during transport, in which case notify within 8 days of receipt, producing 

photographic evidence.

800

112

0

600

11

8 Packaging, handling, transport

Summary of Contents for DIRTMAGCLEAN

























Reviews: