© CalAmp Sentry 4G-900 Pico Base Station
39
Max Rate [Kbits/sec]
Maximum rate for this SF. A value of ‘0’ provides unlimited rate.
Max Latency [µsec]
(UGS, RT, eRT)
Relevant only for UGS, RT and eRT. A value of ‘0’ does not put a limit on latency.
Maximum Latency (delay) for this SF. Set value according to the type of service
(i.e. <100ms for Voice and Video applications.
Unsolicited Grant [µsec]
Interval (UGS, eRT)
Relevant if the UGS – UGI - TBD
A value of ‘0’ provides unlimited UGI.
Tolerated Jitter (UGS
only) [µsec]
the UGS tolerated jitter parameter…. A value of ‘0’ does not put a limit on jitter.
Unsolicited Polling
Interval (RT, nRT)
[µsec]
The maximal nominal interval between successive polling grants opportunities for
this Service Flow, especially used for silence period of VoIP traffic with silence
suppression.
Has Classifiers
Read only. Displays whether or not this SF is assigned Traffic Classifiers.
Values: [True, False]
To configure the SF Classifiers see 5.2.2.2.
4. If required, define the Traffic classifiers according to the following section.
5. Reset the SS-Base Station connectivity:
Resetting the connection of a single SS
(in case the SF is applied on a
Registration
Base
):
•
Click
the
Subscribers
menu option. Choose the
Subscriber Management
sub-menu
and then the
Registered SS
.
•
In the displayed
Registered SS Information
pane select the radio button of the
requested SS and click the
Deregister
button.
Resetting the connection of all registered SSs
(in case the SF is applied to
All Users
):
•
Click
the
Quick Start
menu option.
•
In the displayed
Quick Start
pane click the
Stop Service
button, and then click the
Start
Service
button.
5.2.2.1
Bandwidth Latency and Jitter Guidelines
