Wireless
– Access to all WiMAX parameters configuration
and diagnostics options.
Quick Start
– Access to all parameters required for initial
set up of the system, depending on the operation mode
(Standalone / ASN-GW).
2.3.3
Modifying Parameters
Modified parameters are updated on the Base Station under three conditions, depending on the
parameter:
•
Some parameters do not require special operations - simply click
Apply
and they are
updated on the Base Station.
•
Some parameters affect the service – these are marked by an exclamation mark (!).
To update these parameters, click
Stop Service
and then
Start Service
(in the
Quick Start
panel).
•
Some parameters are updated after performing system reboot - these are marked by an
asterisk (
*
).
For parameters that require reboot or service restart, two values are displayed:
•
The
current
value used by the Base Station.
•
The
configured
value - typed by the user but not yet updated onto the Base Station. (Will
be updated in the Base Station after the required restart/reboot operation).
See example below.
© CalAmp Sentry 4G-900 Pico Base Station
10
