CalAmp Sentry 4G-900 Operating Manual Download

Page: 34 / 73

4.5.6

Upgrade from Version 3.0.4602.yy

This procedure consists of the following steps:

1. Automatically loading a set of files as a package to the secondary directory

2. Running the version and verifying unit operation.

3. Setting the version to run from the Main directory.

4.5.6.1

Loading the New Version to the Secondary Directory

1. Configure FTP server from which the new software file will be downloaded:

•

From

the

Admin

menu, select

SW Uprade

and choose

FTP Server.

•

Type the IP of the FTP server.

•

Type the directory on which the software file is stored

•

Type your FTP Server User Name and Password.

•

Click

Apply.

2. Download the files to the Secondary Directory by doing the following:

•

In the left pane, under

SW Upgrade

, click

Downloads

•

Select

the

File Type

Package.

•

Click

Download

to begin the process.

Summary of Contents for Sentry 4G-900










































































Search results

Summary of Contents for Sentry 4G-900

Reviews:

Related manuals for Sentry 4G-900

Brands by name

Popular brands

CalAmp Sentry 4G-900, Operating Manual

Search results

Summary of Contents for Sentry 4G-900

Reviews:

Related manuals for Sentry 4G-900

Brands by name

Popular brands