8.3 Chassis
Checking that the footplate is fastened
Tool: Torx 45.
1. On both sides of the vehicle, check that the 2 screws are tightened.
2. Perform a test drive to check for loose parts.
Checking that the headset is fastened
Tool: Allen key 8mm.
1. Align yourself in front of the headset.
2. Manually check that the headset is fixed to the frame.
3. Ensure the handlebar is aligned with the wheel.
4. If necessary, remove the stem and the steering spacer to adjust the bearing nut
underneath the stem for ideal tension and bearing support.
5. Perform a test drive to check for loose parts.
Checking that the rear axle is fastened
Tool: Wrench 22mm, 24mm.
1. Check that the nuts of the rear axle are fastened.
2. Perform a test drive to check for loose parts.
Fig. 18
Footplate
38
Summary of Contents for Makka
Page 1: ...Makka Manual Makka Manual...
Page 62: ......
