background image

5.  To change ride mode, briefly push the start button. Pushing and holding 

the same button for 3 seconds when at a standstill, powers off the vehicle.

6.  Get ready for your first Makka ride! 

 WARNING! Risk of burns. Stay clear of vehicle parts that are hot 

after usage.

4.4 Downloading the Ride CAKE app 

Download the app to access the below features, and to make vehicle 
customizations.

1. In App Store, search Ridecake and download the CAKE app. (The app will 
    be available for Android end of 2022).

2. Create an account using the Connectivity ID that you received in an email 
    at the vehicle delivery.

3. Power on the vehicle, see 

Powering on.

4. Once logged in, standing by the vehicle, enable Bluetooth on your mobile  
    device.

5. When asked to pair with Cake, answer Yes. => The vehicle is connected to 
    your mobile device. You can start using the below app features.

  • Battery level check

  • Brake mode change

  • Track and share rides

  • Troubleshooting

  • Ride mode change

  • Speedometer check

  • Vehicle location/GPS

17

Summary of Contents for Makka































































Reviews: