15. Use an 8mm wrench to connect the motor cables according to the following:
I. Blue --> U
II. Green --> V
III. Yellow --> W
16. Connect the motor sensor cable.
17. Attach the control box lid.
18. On the swing arm bridge, tighten the 2 fender screws. Use Torx 30.
19. On the swing arm, tighten the 2 cable holder screws. Use Torx 25.
20. Attach the battery.
52
Summary of Contents for Makka
Page 1: ...Makka Manual Makka Manual...
Page 62: ......