Checking that the brake pads are not worn
Tool: Calipers.
Wanted state: Minimum 1mm brake pad.
1. On both the front (A) and the rear (B) brake caliper, check that the brake
pads are not worn to the aluminum rim.
2. If necessary, replace the brake pads, see the instruction video How to
change the brake pads on
ridecake.com/en/kalk-manuals-and-videos/.
NOTICE The video is applicable for both the Makka and Kalk vehicles.
Checking the brake system
Once the brake pads, brake fluid, and brake hoses have been checked and/or
repaired, perform a test drive to check the brake system.
Checking the brake discs for damages
Wanted state: A straight brake disc without any indentations.
1. Check the brake discs of both wheels for any damages.
2. If necessary, order a new brake disc from CAKE and mount it, see
the front wheel brake disc and/or Replacing the rear wheel brake disc.
Fig. 16
Break pads on the front
and rear brake caliper
35
A
B
Summary of Contents for Makka
Page 1: ...Makka Manual Makka Manual...
Page 62: ......
