Replacing the front wheel brake disc
Tool: Allen key 6mm, 8mm, 10mm, wrench 21mm, Torx 30, a bucket of clean
water with non-abrasive detergent, and a cloth.
1. Place the vehicle on a stand or similar.
2. Loosen the screw clamping the wheel axle. Use Allen key 6mm.
3. Unscrew the front wheel axle and remove the wheel. Use Allen key 8 and 10mm.
4. Unscrew the 4 screws attaching the brake disc to the wheel. Use Torx 30.
5. Clean the wheel.
6. Attach the new brake disc to the wheel. Tighten the 4 screws to 17Nm.
Use Torx 30.
7. Mount the wheel. Tighten the wheel axle screw. Use Allen key 8mm and 10mm.
8. Tighten the screw clamping the wheel axle to 17Nm. Use Allen key 6mm.
9. Perform a test drive to check the brake system.
Fig. 17
Unscrewing the front wheel
axle and the brake disc screws
36
Summary of Contents for Makka
Page 1: ...Makka Manual Makka Manual...
Page 62: ......
