7
B
C
D
A
A
C
B
AUTO
C
5.4
5.5
-
To position the temperature probe (ref. A):
-
pass the probe through the hole on the shoulder (ref. B)
-
insert the probe into the lower hole (ref. C)
-
fix the probe on the relevant hook (ref. D)
By regulating these settings, the system can select either
heating or cooling automatically, excluding normal manual
selection. This setting is particularly suitable for 4-tube
versions. This regulation system can only be activated by a
qualified and authorised installer. To activate this function,
press the summer/winter key (ref. A) for 10 seconds until
both the cooling (ref. C) and heating (ref. B) symbols come
on together. To return to the cooling only or heating only
setting, press and hold the summer/winter key (ref. A) for
10 seconds until the cooling (ref. C) and heating (ref. B)
symbols switch off. Press the key again to select winter
mode. Check the heating symbol is working (ref. B) (on
when set point is higher than ambient temperature, both
are off when the set point is lower. Press the summer/
winter key once to select summer mode. Check the
cooling symbol is working (ref. B) (on when set point is
lower than ambient temperature, both are off when the set
point is higher). This selection is saved even if the power
is turned off.
Air temperature probe assembly (only for models 010 LCD 2T, 010 LCD 4T)
Cooling/Heating automatic settings (only for 4-tube units)
EN
