10
6.1
B
A
A
The wall-mounted remote control WALL LCD is an
electronic thermostat (fitted with an optional temperature
probe which can be remotely installed in one of the fan
coils connected to it) with the possibility to control one
or more units (up to max. 30) fitted with an electronic
controller for remote control MB 010 2T or MB 010 4T.
-
Install the wall-mounted remote control WALL LCD
away from doors and/or windows and from heat
sources (radiators, fan coils, hobs, direct sunlight), on
internal walls and around 1.5m from the floor.
The wall-mounted remote control is inside the pre-
assembled package, therefore prior to affixing to the wall,
the two parts should be separated by unhooking the two
protruding teeth on the rear (A).
Use the base of the controller (ref. B in diagram) to trace
the fixing points on to the wall (use two opposing holes).
Then proceed with the following operations:
-
drill holes in the wall;
-
pass the cables through the window on the base;
-
fix the base of the controller to the wall using suitable
screws and wall plugs;
-
make the electrical connections then close the
controller taking care not to crush the conducting
wires.
WALL LCD
Wall-mounted remote control panel assembly WALL LCD
