1
Hi Flow Stroller Technical Service Manual • PN 14314465 Rev
F
9
H
i F
lo
w S
tr
oller
Safety
V
Table 6*
Recommended separation distances between portable and mobile
RF communications equipment and the Hi Flow
The Hi Flow is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer
or the user of the Hi Flow can help prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the Hi Flow as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output
Separation distance according to frequency of transmitter
power of transmitter
m
W
150 kHz to 80 MHz
80 MHz and 800 MHz 800 MHz to 2,5 GHz
d=1.2√P
d=1.2 √P
d=2.3 √P
0,01
0.12 m
0.12 m
0.23 m
0,1
0.38 m
0.38 m
0.73 m
1
1.2 m
1.2 m
2.3 m
10
3.8 m
3.8 m
7.3 m
100
12 m
12 m
23 m
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d) in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the trans-
mitter in watts (W) according to the transmitter manufacturer.
NOTE 1 at 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
* This table is included as a standard requirement for equipment which has been tested to specific test levels and over specific frquency
ranges and been found compliant with regulations.
