Cup filling
volume
Bar lights up
Cup filling
volume
Bar flashes
19
Decalcifying
Flashes
Decalcifying programme running.
18
Cleaning
Flashes
Cleaning programme running.
25
Brewing strength Bar lights up
25
Brewing strength Off
Bean container is set to ground
coffee or extraction position.
24
18
Cleaning
Lights up
Appliance needs cleaning.
19
Decalcifying
Lights up
Appliance must be decalcified.
Coffee grounds container not fitted
or not properly inserted.
Flashes
18
Coffee grounds
container
Coffee grounds container full. Take care
when emptying that the service door is
closed and the machine switched on.
Wait about 5 seconds before replacing
the grounds container.
18
Coffee grounds
container
Lights up
18
Water reservoir
Flashes
Knob for steam/hot water
outlet is set to open.
18
Water reservoir
Lights up
Water reservoir empty. Fill with water and
replace. Continue operation by pressing the
start key. It can happen that air is trapped
between the pump and the water reservoir.
In this case, confirm repeatedly via the start
key until the new water supply is drawn.
19
20
Symbol No
Meaning
Explanation
Symbole and displays
3.1 Symbole
3
Symbole and displays
3.2 Displays
3
Symbol No
Meaning
Display
Explanation
22
On/Off
23
Start/Stop
21
1 or 2 cups
21
Steam
21
Decalcifying
21
Cleaning
21
Function
2
Bean container
Ground coffee
Steam/hot
water outlet
Indication and setting of water
hardness and Auto-Shut-Off time.
Remove bean container. Set the bean
selector switch to midposition beforehand.
Use whole beans for brewing.
The grinder is activated.
Starts and stops the selected
function and confirms all inputs.
Switching machine on/off.
Making 1 or 2 cups.
Steam operation.
Automatic decalcifying programme.
Automatic cleaning programme.
Steam (under steam operation) or hot water
(under normal operation) emerges from the
milk frother.
24
25
Brewing strength Bar flashes
Bean container is set to nondefined or
extraction position when drawing beans.
2
15
Brewing with ground coffee; do not put
in more than 2 level scoops of coffee.
Indicates the brewing strength set, adjus-
table with brewing strength regulator.
Whole coffee beans
2
18
Temperature
Flashes
Operating temperature not yet reached.
Indicates the cup filling volume, use
the water quantity regulator to adjust.
The brewing unit is overcharged. Switch the appli-
ance off and remove the brewing unit. Remove
the ground coffee and replace the brewing unit.
The appliance is then ready for use again.
The service door is open or the
brewing unit is not fitted.
Flashes
18
Cleaning,
Decalcifying
The service door was opened or
Auto-Shut-Off function is activated.
Automatic shut
down
18
Temperature
Lights up
Appliance is ready for use.
EN
GL
ISH
F
Downloaded from CoffeeMachineManual.com Manuals