EN1805CMINSA Rev. 5 2021-10
77
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL - Encore 29
Low Water Level in the Tank.
The water tank failed to fill completely within the prescribed time. The water inlet valve is
deactivated for safety reasons.
- Maximum filling time is 4 minutes when the power switch of the coffee brewer has been set to the
ON position.
- Maximum filling time is 2 minutes after the first tank fill.
Check the water supply line to ensure that the pressure is adequate (between 20 psi and 80 psi). If
the machine uses a waterline filter, it might be worn out and needs to be replaced.
Press on the "Restart Filling" button on the error screen to restart the tank filling process.
Water Tank Not Full. Please Wait While Filling (1 to 3 minutes).
After setting the power switch of the machine to the ON position, this message will be displayed
until the water tank is full.
Water Temperature Not High Enough. Please Wait.
The machine will display this message and stop dispensing drinks if the water temperature of the
tank drops below the "Warming up (F)" temperature set in Service mode (see section 6.6.1). To
disable this feature, set the warming up temperature to 0.
Grinder Issue
The grinder is jammed, broken or fails to work normally due to indirect problem.
All coffee based beverages are disabled. See section 9.6 for complete information.
