EN1805CMINSA Rev. 5 2021-10
59
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL - Encore 29
C
le
an
in
g
an
d
San
it
iz
in
g
7.8.2 Bean Hopper Funnel
Frequency: monthly or every 1,000 cycles
1. Turn OFF the brewer. Open the brewer’s door.
2. Pull down the bean hopper retaining pin.
3. At the same time, pull the bean hopper forward.
4. Unscrew the funnel bracket and remove it with the rubber funnel.
5. Unsnap the two parts (funnel bracket and rubber funnel). Clean and sanitize under hot
water. Air dry completely before reinstalling parts.
6. Order a large coffee to ensure that all parts and switches are working properly.
Beans will not fall when removing the hopper. However, this step is easier to
complete if the hopper is empty.
7.8.3 Coffee Chute
Frequency: monthly or every 1,000 cycles
1. Turn OFF the brewer. Open the door of the machine and remove the front panel.
2. Pull the coffee chute out from its socket.
3. Clean it thoroughly under hot water.
4. Air dry completely before reinstalling the parts.
5. Reinstall the front panel and close the door.
If the chute is not dry when reinstalled, coffee grounds may stick in the chute.
Coffee chute
Funnel
bracket
Funnel
bracket screw
Bean rubber
funnel
