Cafection Encore 29 Service & Installation Manual Download Page 41

Page: 41 / 82

EN1805CMINSA Rev. 5 2021-10

www.cafection.com 800-561-6162

SERVICE & INSTALLATION MANUAL - Encore 29

6.6.2 Tool Sub Tab

1. This button is used to enter Manual Control mode and manually test the machine’s

components.

This mode is intended for advanced technicians.

Risk of damages to the machine or injuries.

2. This button is used for demo presentations. The user can go through drink selection,

and no coffee will be dispensed.

3. This button is used to configure the coffee brewer during the initial setup. It provides

installation tips and requirements.

4. This button creates a backup file

on the coffee brewer.

The following data are saved

in the backup: values of each recipe, configurations, brew cycles, Energy Saving
schedules, Free Vend schedules, maintenance data and machine users list.

5. This button restores the latest backup file created

on the coffee brewer

. All the data

saved on the date indicated on the button will be restored.

e Mo

Summary of Contents for Encore 29



















































































Search results

Summary of Contents for Encore 29

Reviews:

Related manuals for Encore 29

Brands by name

Popular brands

Cafection Encore 29, Service & Installation Manual

Search results

Summary of Contents for Encore 29

Reviews:

Related manuals for Encore 29

Brands by name

Popular brands