CONFIGURATION USING THE WEB INTERFACE
-
Hex R1290I Technical Information Manual
23
4
CONFIGURATION USING THE WEB
INTERFACE
Introduction
The reader can be configured via reader menu or using the web interface.
This chapter helps you to configure the Hex reader using the web interface.
For information on the configuration using the reader configuration menu, please refer to the chapter
§
page 16.
The Web Interface is accessible only via the Ethernet connection:
1.
Connect the Hex to the power supply.
2.
Plug an Ethernet cable (not provided) into your computer and connect the other end of the Ethernet cable to
the reader. By default, the Hex R1290I is configured with the static IP address 192.168.0.2. If your private
network matches the default network configuration of the reader you can connect to it. Otherwise you can
either change the network configuration of the reader (see §
page 18) to connect it to your network
or disconnect your PC from your network and connect it to the network of the reader.
By factory default, the Hex web interface is reachable at the following URL: 192.168.0.2.
To login, type
root
in the Username text box and
root
in the Password textbox. To change the username and password
please refer to
page 26.
