Caen RFID Hex R1290I, Technical Information Manual

Page: 19 / 57

CONFIGURATION MENU VIA READER - Hex R1290I Technical Information Manual 19
RFID
The RFID menu is the third option of the configuration menu. To select it, hold down the trigger button.
To scroll through the RFID options, press the up and down buttons.
The RFID submenu options are the following:

Profile

Easy2Rd opt.

HID opt.

Back: select “back” with the u p or down button and press the trigger button to return to the main menu.
Press the trigger button to select a submenu options.
Profile
The display shows the active profile. Press the trigger button to change the current profile. The available profiles are:

Easy2read (factory default) is the CAEN RFID easy2read communication protocol that permits to control the
reader using the CAEN RFID Easy Controller Application or the SDK (Software Development Kit) library. For
details on the use of the easy2read profile please refer to
§ Easy2read Profile chapter page 37.
The configuration options using the easy2read profile are described in the § Easy2Rd opt. paragraph page
19.

HID: choosing this option you select the keyboard emulation protocol. For details on the use of the HID
profile please refer to § HID PROFILE chapter page 45.
The configuration options using the HID profile are described in the § HID opt. paragraph page 21.

Custom: the use of this profile allows the user to upload his own scripts to the reader. For details on the use
of the Custom profile please refer to § CUSTOM PROFILE page 47.
The configuration options using the CUSTOM profile are accessible only via Web Interface. For more
information please refer to §
Custom paragraph page 35.
Select “back” with the up or down button and press the trigger button to return to the RFID menu.
Easy2Rd opt.
Through the Easy2Rd opt submenu you can configure the reader when using the easy2read profile.
The Easy2Read options are the following:

RF Power: through the RF Power submenu you can set the start-up power level emitted by the reader. The
display shows the default RF Power. To scroll through the RF Power options, press the trigger button until
the desired RF Power value is shown.
The RF Power value is expressed as a percentage value of the maximum RF output power:

5%

10%

20%

40%

60%

80%

100%