CONFIGURATION USING THE WEB INTERFACE
-
Hex R1290I Technical Information Manual
26
SYSTEM
The SYSTEM CONFIGURATION options are the following:
Login User Name:
To access the web interface, the default username is “root”. Use this option to change
the login username.
If you forgot your username you must necessarily make a factory reset (see
Login Password:
To access the web interface, the default password is “root”. Use this option to change the
login password.
If you forgot your password you must necessarily make a factory reset (see
Local Config:
enable or disable. By default the configuration menu via reader is enabled. Through this option
you can enable or disable the local configuration in the reader: if you want to configure the reader only via
web interface, disable the
Local Config
option.
Power Up Beep:
enable or disable. By default, the
Power Up Beep
is disabled. Through this option you can
enable or disable the beep at the power up of the reader.
Package Upload:
use this function to upload the script program to be used with the custom profile. Give the
package the same name used for the code. Please remember to keep your code as simple as possible; the
R1290I reader scripting capability is meant for running inside the reader very simple task (max 3 MB). For
more information on the use of the custom profile please refer to §
Warning:
To save the changes click on the “
SAVE
” button. Note that all changes made via the web
interface are active only after the reboot of the reader. Click on the “Reboot” button. After reboot, the
new settings are active.
