CT-BOX Viewer – Quick Start Guide
10
Figure 7:
I/O Alarm tab settings.
SD CARD MANAGER
In the
SD CARD
), a further icon w.r.t. previous tabs is present at
the right-bottom to mount/unmount an eventual SD card in the CT-BOX. Once the SD
Card is mounted, the user can type the name of the text file to save the acquired data.
Figure 8:
SD Card Manager tab settings.
2.2.2
FAULT
The
FAULT
icon [normally yellow colored, in red when a fault occurs as in
3(b)
] reveals the status of the CT-BOX, showing eventual errors (left column) and/or
alarms (right column) when the current value is outside the limits (see I/O Alarms in
Sec. 2.2.1
The reset button on the Status window allows to reset the Alarm and Error conditions
of the CT-BOX. Reset button is shown if and only if the CT-BOX unit is not
acquiring data.
shows an example of a fault condition during the CT-BOX operation:
CT-BOX Not Ready
error has occurred since the unit needs an initial warm-up.
