LearningSpace Ultraportable Getting Started Guide
905K463152 v2.0
19
Connecting Third-party Simulator to the Ultraportable
CAE LearningSpace can accommodate third-party simulators via the Display Capture Unit (DCU)
Framegrabber.
Connecting a third-party simulator entails physical connection and adding the DCU to the room.
1. Connect your simulator to the Display Capture Unit Framegrabber.
2. Plug the Framegrabber cable into the USB 3 port on the back of the Toughbook.
Back of the Toughbook with the Framegrabber connected
3. Once the simulator is physically connected, go to the System module of the
LearningSpace.
4. Switch to the
Rooms
tab.
Rooms tab in the System module
5. Click the cogwheel of the only displayed room.
Cogwheel
Rooms tab
Summary of Contents for lntuity LearningSpace Ultraportable
Page 1: ...Ultraportable Getting Started Guide LearningSpace lntuity...
Page 44: ......
