LearningSpace Ultraportable Getting Started Guide
12
™
Ultraportable as a Satellite Unit
WARNING:
If you intend to re-configure your stand-alone Ultraportable to use as a satellite unit, the
reset will result in complete loss of data on your unit.
To set up your LearningSpace Ultraportable as a Satellite unit:
1. Power on the laptop and connect the Uplink cable (thunderbolt adapter) to the
institutional network. Ensure the laptop receives an IP address and a connection is
established.
2. Open your browser and enter the address:
setup.learning.space
.
The
Network
tab of the
Network Settings
window appears.
Network Settings at
setup.learning.space
3. Switch to the
Synchronizing
tab.
4. Activate the satellite mode by clicking the
Satellite mode
switch.
Synchronizing tab of the Initial Settings window
setup.learning.space
Tabs of Network Stetings
Synchronizing tab
Satellite mode switch
Summary of Contents for lntuity LearningSpace Ultraportable
Page 1: ...Ultraportable Getting Started Guide LearningSpace lntuity...
Page 44: ......
