Driver
Information
Entertainment
Systems
❏
Reviewed with Customer (Please Check Box)
Refer to Owner Manual for further information.
Convenience
Features
Vehicle
Personalization
Maintenance
Owner
Privileges
To turn the system on:
•
Turn the exterior lamp control on
the turn signal/multifunction lever
to the AUTO (Automatic) position.
The High-Beam On Light will appear
on the instrument panel cluster when
the high-beam headlamps are on.
SmartBeam will only activate your
high-beams when driving over 10
mph.
To turn the system off:
•
Turn the exterior lamp control on
the turn signal/multifunction lever
to any setting other than AUTO.
ADAPTIVE CRUISE
CONTROL (ACC)
(if equipped)
This feature allows
you to keep cruise
control engaged
during moderate
traffic conditions
without having to
continually adjust the
cruise control system.
ACC uses radar to
detect a vehicle
within 328 feet
(100 m) of your direct path. The
system operates at speeds above
25 mph (40 km/h). When engaged,
ACC automatically applies limited
braking or acceleration to maintain a
selected follow distance to the
vehicle ahead. If there is no vehicle
in your path, ACC will respond like
traditional cruise control.
The ACC controls are located near
the end of the multifunction lever on
the left side of the steering column
and on the steering wheel.
(Off): Move the cruise control
switch to this position to turn the
system off (or apply your brake to
temporarily disengage the system).
(On): Place the switch in this
position to turn the system on.
+ (Resume/Increase): Move the
switch to this position to resume a
previously set speed or to increase
speed when ACC is already active.
(Set/Decrease): Press this button,
located in the tip of the multifunction
lever, to set the speed or to decrease
speed when ACC is already active.
