Cadillac 2016 CTS Owner'S Manual Download Page 11

Page: 11 / 401

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159276) - 2016 - crc - 10/5/15

In Brief

From inside, press

. The

indicator light in the switch will
illuminate when locked. See

Power

Door Locks

Trunk

To open the trunk, press

on the

driver door, press

twice quickly

on the Remote Keyless Entry (RKE)
transmitter, or press the touch pad
on the rear of the vehicle after
unlocking all doors.

For Keyless Access, press the
touch pad on the rear of the trunk
above the license plate when the

RKE transmitter is in range. See

Remote Keyless Entry (RKE)
System Operation

and

Trunk

Windows

The driver power window switches
control all the windows. The
passenger switch only controls that
window.

Press the switch down to lower the
window. Pull the switch up to raise
it. See

Power Windows

Seat Adjustment

Power Seats

High Performance Seat

To adjust the seat:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the seat by
moving the rear of the control up
or down.

If equipped, raise or lower the
front part of the seat cushion by
moving the front of the control
up or down.

Summary of Contents for 2016 CTS


















































































































































































































































































































































































































Search results

Summary of Contents for 2016 CTS

Reviews:

Related manuals for 2016 CTS

Brands by name

Popular brands

Cadillac 2016 CTS, Owner'S Manual

Search results

Summary of Contents for 2016 CTS

Reviews:

Related manuals for 2016 CTS

Brands by name

Popular brands