Cadillac 2016 CTS Owner'S Manual Download Page 181 | Manualshive

Page: 181 / 401

background image

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159276) - 2016 - crc - 10/5/15

180

Climate Controls

Automatic Operation

The system automatically controls
the fan speed, air delivery, air
conditioning, and recirculation in
order to heat or cool the vehicle to
the desired temperature.

When the indicator light is on or
AUTO is displayed on the touch
screen, the system is in full
automatic operation. If the air
delivery mode or fan setting is
manually adjusted, the auto
indicator turns off and the display
will show the selected settings. Auto
operation can be turned off
individually for climate settings.

For automatic operation:

1. Press AUTO.

2. Set the temperature. Allow the

system time to stabilize. Then
adjust the temperature as
needed for best comfort.

To improve fuel efficiency and to
cool the vehicle faster, recirculation
may be automatically selected in
warm weather. The recirculation

light will not come on. Press

@

to

select recirculation; press it again to
select outside air.

English units can be changed to
metric units through the instrument
cluster. See

“

Cluster Options Menu

”

under

Instrument Cluster

0

116

.

OFF (Fan) :

Press to turn the fan on

or off. The temperature control and
air delivery mode can still be
adjusted.

w

/

x

(Driver and Passenger

Temperature Controls) :

The

temperature can be adjusted
separately for the driver and the
passenger. Press to increase or
decrease the temperature. Press
and hold to rapidly increase or
decrease the temperature.

The driver and passenger
temperatures can also be adjusted
by pressing the controls on the
touch screen.

SYNC (Synchronized
Temperature) :

Press SYNC on the

touch screen to link all climate zone
settings to the driver settings. Adjust
the driver side temperature control

to change the linked temperature.
When the passenger settings are
adjusted, the SYNC button is
displayed when the temperatures
are unlinked.

Rear (If Equipped) :

Press this

button on the front climate control
touch screen to open the rear
climate control screen. The rear
climate control settings can now be
adjusted from the front
passenger area.

Manual Operation

z 9 y

(Fan Control) :

Press the

fan control buttons or the touch
screen fan control, to increase or
decrease the fan speed. Press and
hold the buttons or the touch screen
control to adjust speed more
quickly. The fan speed setting
displays. Pressing either button
cancels automatic fan control and
the fan can be controlled manually.
Press AUTO to return to automatic
operation. To turn off the fan and
climate control system, press and
hold the fan down button or touch
screen fan control until it is off.

«
...
179
180
181
182
183
...
»

Summary of Contents for 2016 CTS


















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 CTS

Brand: AAMP of America Pages: 6

CK 3000 Evolution

Brand: Parrot Pages: 2

Brand: Code 3 Pages: 8

Brand: Ford Pages: 37

Brand: FAAFTECH Pages: 8

Brand: AutoMaxi Pages: 2

Brand: TATA Motors Pages: 136

Brand: JANE Pages: 58

Brand: Anker Technology Pages: 8

2007 SLR Mclaren

Brand: Mercedes-Benz Pages: 425

Brand: Blue Ox Pages: 9

Brand: Prorack Pages: 13

Nemesis Ultra FNU200

Brand: Purpleline Pages: 4

MagicComfort MSH50

Brand: Waeco Pages: 104

Brand: Kuda-Phonebase Pages: 3

Brand: Buzz Rack Pages: 8

Brand: Emerson Pages: 24

Brand: Emerson Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands