manualshive.com logo in svg

Cadillac 2016 CTS, Owner'S Manual

The Cadillac 2016 CTS is a luxury sedan designed to provide a sophisticated driving experience. For those in need of its comprehensive user manual, you can easily download it for free from our website, ensuring you have all the necessary information to fully enjoy this exceptional vehicle.

Share
Download
background image

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159276) - 2016 - crc - 10/5/15

274

Vehicle Care

Caution

Failure to use the recommended
engine oil or equivalent can result
in engine damage not covered by
the vehicle warranty.

Viscosity Grade

Use SAE 5W-30 viscosity grade
engine oil.

Cold Temperature Operation: In an
area of extreme cold, where the
temperature falls below

−

29 °C

(

−

20 °F), an SAE 0W-30 oil may be

used. An oil of this viscosity grade
will provide easier cold starting for
the engine at extremely low
temperatures. When selecting an oil
of the appropriate viscosity grade, it
is recommended to select an oil of
the correct specification. See

“

Specification

”

earlier in this section.

Engine Oil Additives/Engine
Oil Flushes

Do not add anything to the oil. The
recommended oils meeting the
dexos1 specification are all that is
needed for good performance and
engine protection.

Engine oil system flushes are not
recommended and could cause
engine damage not covered by the
vehicle warranty.

What to Do with Used Oil

Used engine oil contains certain
elements that can be unhealthy for
your skin and could even cause
cancer. Do not let used oil stay on
your skin for very long. Clean your
skin and nails with soap and water,
or a good hand cleaner. Wash or
properly dispose of clothing or rags
containing used engine oil. See the
manufacturer's warnings about the
use and disposal of oil products.

Used oil can be a threat to the
environment. If you change your
own oil, be sure to drain all the oil
from the filter before disposal. Never
dispose of oil by putting it in the

trash or pouring it on the ground,
into sewers, or into streams or
bodies of water. Recycle it by taking
it to a place that collects used oil.

Engine Oil Life System

When to Change Engine Oil

This vehicle has a computer system
that indicates when to change the
engine oil and filter. This is based
on a combination of factors which
include engine revolutions, engine
temperature, and miles driven.
Based on driving conditions, the
mileage at which an oil change is
indicated can vary considerably. For
the oil life system to work properly,
the system must be reset every time
the oil is changed.

When the system has calculated
that oil life has been diminished, it
indicates that an oil change is
necessary. A CHANGE ENGINE
OIL SOON message comes on. See

Engine Oil Messages

0

143

.

Change the oil as soon as possible
within the next 1 000 km (600 mi).
It is possible that, if driving under
the best conditions, the oil life

Summary of Contents for 2016 CTS


















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 CTS

Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Mazda 2012 Mazda6 Owner'S Manual preview
2012 Mazda6
Brand: Mazda Pages: 527
Cadillac 2008 Escalade EXT Owner'S Manual preview
2008 Escalade EXT
Brand: Cadillac Pages: 496
Pacbrake C44059 Installation Manual preview
C44059
Brand: Pacbrake Pages: 14
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Fiat Fiat Bravo LPG Owner'S Manual preview
Fiat Bravo LPG
Brand: Fiat Pages: 24
Valeo AS1A Owner'S Manual preview
AS1A
Brand: Valeo Pages: 28
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
TEINHOF V-295 Fitting And Operation Manual preview
V-295
Brand: TEINHOF Pages: 2
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37

Brands by name

Popular brands

Load more brands