Cadillac 2016 CTS Owner'S Manual Download Page 19

Page: 19 / 401

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159276) - 2016 - crc - 10/5/15

In Brief

There are four positions:

Turns off the exterior lamps.

The knob returns to the AUTO
position after it is released. Turn to

again to reactivate the AUTO

mode. In Canada, the headlamps
will automatically reactivate when
the vehicle is shifted out of P (Park).

AUTO :

Automatically turns the

exterior lamps on and off,
depending on outside lighting.

;

Turns on the parking lamps

including all lamps, except the
headlamps.

Turns on the headlamps

together with the parking lamps and
instrument panel lights.

See

Exterior Lamp Controls

164

and

Daytime Running Lamps

(DRL)

167

Windshield Wiper/Washer

With the ignition in ACC/
ACCESSORY or ON/RUN/START,
move the lever to select the wiper
speed.

HI :

Use for fast wipes.

LO :

Use for slow wipes.

INT :

Use this setting for intermittent

wipes or Rainsense

™

, if equipped.

For intermittent wipes, move the
windshield wiper lever to INT. Turn

the

INT band up for more

frequent wipes or down for less
frequent wipes.

If equipped with Rainsense and the
feature is enabled in vehicle
personalization, move the
windshield wiper lever to INT and
turn the

INT band to adjust the

sensitivity to moisture.

Turn the band up for more
sensitivity to moisture.

Turn the band down for less
sensitivity to moisture.

Move the windshield wiper lever
out of the INT position to
deactivate Rainsense.

To turn the Rainsense feature on or
off, see

“

Rain Sense Wipers

”

under

Vehicle Personalization

153

OFF :

Use to turn the wipers off.

Summary of Contents for 2016 CTS


















































































































































































































































































































































































































Search results

Summary of Contents for 2016 CTS

Reviews:

Related manuals for 2016 CTS

Brands by name

Popular brands

Cadillac 2016 CTS, Owner'S Manual

Search results

Summary of Contents for 2016 CTS

Reviews:

Related manuals for 2016 CTS

Brands by name

Popular brands