Cadillac 2016 CTS Owner'S Manual Download Page 177

Page: 177 / 401

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159276) - 2016 - crc - 10/5/15

176

Infotainment System

Performance Traction
Management (PTM) Mode:
Displays the current PTM mode.
The options are Wet, Dry, Sport
1, Sport 2, or Race.

Current Lap Time: Displays the
elapsed lap time if the finish line
is defined and the vehicle has
crossed the defined finish line at
least once.

Performance Timing:

Displays these vehicle metrics:

Vehicle Speed: Same as Sport.

Engine Rotations Per Minute
(RPMs): Same as Sport.

Transmission State (Current
Gear): Same as Sport.

–

100 km/h (0

–

60 mph), 0

–

200 km/h (0

–

100 mph), 400 m

(1/4 mi), and 0

–

200

–

0 km/h (0

–

100

–

0 mph): The timer starts

recording as soon as the vehicle
accelerates. As the vehicle
passes each speed and distance
milestone, it is displayed on the
overlay.

Throttle Position: Displays
the percentage of throttle applied
from 0

–

100%.

StabiliTrak Active Indicator: The
graphic only displays if the
active handling systems are
activated.

Naming Convention

The recorded video file name is
stored as the recorded date and the
length of the recording.

If the recorded session was
recorded while the system was in
Valet Mode, the file name will
display the mode, date, and length
of time.

Settings

Touch the Settings button from the
PDR menu to display settings.

Summary of Contents for 2016 CTS


















































































































































































































































































































































































































Search results

Summary of Contents for 2016 CTS

Reviews:

Related manuals for 2016 CTS

Brands by name

Popular brands

Cadillac 2016 CTS, Owner'S Manual

Search results

Summary of Contents for 2016 CTS

Reviews:

Related manuals for 2016 CTS

Brands by name

Popular brands