Cadillac 2009 STS, Manual

Page: 85 / 154

3. Press the CONFIG hard key.
4. Adjust the settings for the driver seat, the outside
mirrors, and the steering column to a comfortable
driving position or exit position.
5. Push and hold either the Driver 1 or Driver 2 screen
buttons to store the driving positions. Push and
hold the Set Exit screen button to store the
exit position.
Two beeps are heard to confirm that the driver or
exit position is stored.
The memory settings are now programmed.
Any changes that are made to the Head-Up
Display (HUD), navigation system, and climate
controls while driving automatically stores when
then ignition is turned off.
Recall Memory Settings
To recall memory settings:
1. Be sure the ignition is either on, in accessory mode,
or in RAP. The vehicle must be stopped and/or the
shift lever must be in P (Park).
2. Press the CONFIG hard key.
3. Push and release either the Driver 1 or Driver 2
screen buttons to recall the driving positions.
Push and release the Set Exit screen button to
recall the exit position.
If the vehicle is in P (Park), a beep is heard and
your previously saved driving position or exit
position is recalled. If the vehicle is not in P (Park),
three beeps are heard and your previously saved
driving position or exit position will not be recalled.
A memory recall can be stopped by pressing any
memory seat or mirror position button. To have the
stored driving positions recalled when unlocking
the vehicle with the keyless access transmitter or
when starting the vehicle, see “Occupant Position”
under Personalization on page 5-2 for more
information.
2-69