Cadillac 2009 STS, Manual

Page: 93 / 154

e (Audio): Press to view the AUDIO ADJUST screen.
See “Audio Adjust” screen later in this section.
ǻ
(Seek/Scan): To seek stations, press the up or
down arrow to go to the next or previous station
and stay there.
To scan stations, press and hold either arrow for less
than two seconds. The radio goes to a station, plays for
a few seconds, then goes to the next station. To stop
scanning, press either arrow again or touch the scan
screen button.
Tuning Knob: Turn to change frequencies.
Finding a Station
Press the band/source screen button, located in the top
left corner (AM, FM, CD, etc.), from any screen to
access the audio source screen. Once this screen is
displayed, press the BAND hard key to toggle between
the bands or touch the desired band screen button,
to select it. Scan: To scan stations, touch the Scan screen button.
The radio goes to a station, plays for a few seconds,
then goes to the next station. Touch Scan again to stop
scanning.
To scan preset stations, touch and hold Scan for
two seconds. The radio goes to the next preset station,
plays for a few seconds, then goes to the next preset
station. Touch Scan again to stop scanning.
FM source shown, other sources similar
3-3