Entering the Personalization Menu
To enter the personal settings mode:
1. Turn the ignition to either on, Acc. (accessory), or in
Retained Accessory Power (RAP). See “Ignition
Positions” in the Index of your vehicle’s owner
manual.
The transmission must be in either P (Park), or the
vehicle must be stopped.
To avoid draining the vehicle’s battery, make sure
the headlamps are off. See “Headlamps” in the
Index of the vehicle’s owner manual.
2. Press any button on the appropriate keyless access
transmitter to identify yourself as Driver 1 or Driver 2.
The driver number is shown on the back of the
keyless access transmitter.
3. Press the CONFIG hard key.
4. Touch the Vehicle screen button.
5. Access the Personal Menu Setting by pressing the
Personal Settings screen button.
6. The appropriate driver information should be
highlighted. To change driver numbers, touch the
appropriate keyless access transmitter to identify
yourself as Driver 1 or Driver 2. The system shows
the start up screen when the driver is changed.
7. The Personal Settings button must be highlighted to
continue programming. If it is not highlighted, touch
it. If it is highlighted, touch any of the buttons on
the right of the screen to begin programming.
Some features have submenus that show additional
features that can be turned on or off. After entering a
submenu, select a feature and scroll through the menu
and make the necessary change.
5-4
Summary of Contents for 2009 STS
