•
Background noise may cause voice commands
to be misunderstood, including airflow noise
from wind.
•
To use the voice recognition system, the map
DVD must be loaded and the navigation system
must be on.
This system is able to recognize commands in three
different languages. The system will only recognize
commands based on the language selected from the
Driver Information Center (DIC). See “Driver Information
Center, DIC Vehicle Personalization” in the Index of
your vehicles owner manual.
Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with the
optional words in brackets. To use the voice commands,
refer to the instructions listed previously.
Voice Tag Commands
The following are voice tag commands you can access
by clearly stating the commands exactly as they are
written. You may have up to 40 voice tag entries
for destinations.
Navigation go to [destination], navigation
select: These commands instruct the system to select
a destination saved under the voice tag you have
stored. The system will prompt you for a destination
name then wait for you to state the name.
If you are not currently driving on a route, the system
will automatically create the voice tag destination as the
final destination. If you are currently driving on a
route, the system will automatically create the voice tag
destination as a stopover. Up to three stopovers can
be created.
Storing Voice Tags
From the address book entry information page, press
the Add Voice tag screen button. The system will
respond “Name Please?” and you will have four seconds
to record a name. The system will ask for confirmation
of the name before saving it as a voice tag.
Navigation Help
Navigation Help: This command instructs the system
to assist with navigation commands.
Display Commands
Use the following display commands to set the
display mode.
Display [set] day [mode]: Use this command to set
the display to daytime mode.
4-3
