To add a stopover:
1. Press the DEST hard key.
2. Select the Add Stopover screen button. This button
will only appear if a route has been calculated.
3. Using the desired method of entering a destination,
enter the stopover. See “Destination” previously for
more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
6. To add the second and third stopovers, press the
DEST hard key, then select the Add screen button,
where you would like the next waypoint to fall on
the route.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and highlight
the route.
8. Select the Start Guidance screen button. You are
now ready to start your route.
To delete a stopover from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for the desired
stopover to delete.
3. The system will display a pop-up confirmation
message. Choose Yes to delete the stopover;
touch No to cancel this operation.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
Suspend Guidance
Press this screen button, from the Route screen, to put
the current route on hold.
Resume Guidance
Press this screen button, from the Route screen, to
resume guidance on the current route.
Cancel Guidance
Press this screen button, from the Route screen, to
cancel the current route.
2-26
