Installing the DVD Map Disc
Your dealer/retailer may have installed the map DVD. If
the map DVD was not installed, do the following to load it:
1. Turn the ignition on.
2. Press the
O
(power) knob to turn the navigation
system on.
3. Load the map DVD partway into the slot located
just below the screen. The system will pull it in.
4. If the Caution screen appears, touch the OK screen
button to agree.
DVD Map Disc Messages
If Disc Read Error appears on the display and/or the
map disc comes out, it could be for one of the following
reasons:
•
If the map disc was installed into the CD slot. See
“Installing the DVD Map Disc” previously.
•
It is very hot, when the temperature returns to
normal, the map disc should play.
•
You are driving on a very rough road. When the road
becomes smoother, the map disc should play.
•
The map disc is dirty, scratched, wet, or
upside down.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer/retailer.
Ejecting the DVD Map Disc
Z
(DVD Map Disc Eject): Press the eject button,
located next to the upper disc slot, to eject the DVD
map disc.
Handling the DVD Map Disc
When handling the DVD map disc, be careful of the
following:
•
Handle the disc very carefully to avoid
contamination or flaws. Signals may not read out
properly if the disc gets contaminated or flawed.
•
If the disc gets soiled, use a soft cloth to gently wipe
it out from the center of the disc to the outside. Do
not use photographic record cleaner, solvents,
or other cleaners.
•
Do not use the disc to rest on while writing or
drawing using any writing utensil or attach a seal to
any of the sides or the disc.
•
Do not keep the disc in direct sunlight, high
temperatures, or humidity.
•
After using the disc, place it back into the
original case.
2-5
