Rear Vision Camera
Your vehicle may have a rear vision camera system.
Read this entire section before using the camera
system.
The rear vision camera system is designed to help the
driver when backing up by displaying a view, on the
navigation screen, of the area behind the vehicle when
the driver shifts the vehicle into REVERSE (R). Once
the driver shifts out of REVERSE (R), the navigation
screen will go back to the last screen that had
been displayed, after a delay.
Turning the Rear Vision Camera System
On or Off
To turn the rear vision camera system on or off, do the
following:
1. Shift into PARK (P).
2. Press the CONFIG hard key to enter the configure
menu options, then press the CONFIG hard key to
select Display or touch the Display screen button.
3. Select the Rear Camera Options screen button.
The Rear Camera Options screen will display.
4. Select the Video screen button. When the video
button is highlighted, RVC system is on.
The delay that is received after shifting out of
REVERSE (R) is approximately 10 seconds. The delay
can be cancelled by performing one of the following:
•
Pressing a hard key on the navigation system
or touching the navigation screen.
•
Shifting in to PARK (P).
•
Reach a vehicle speed of 7 mph (11 km/h).
2-34
