Cadillac 2006 Escalade EXT Owner'S Manual Download Page 53 | Manualshive

Page: 53 / 484

Cadillac 2006 Escalade EXT Owner'S Manual Download Page 53

5. Pull the rest of the shoulder belt all the way out of

the retractor to set the lock.

6. To tighten the belt, push down on the child restraint,

pull the shoulder portion of the belt to tighten the
lap portion of the belt and feed the shoulder
belt back into the retractor. If you are using a
forward-facing child restraint, you may find it
helpful to use your knee to push down on the
child restraint as you tighten the belt.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an
adult or larger child passenger. If the top tether
is attached to the top tether anchor, disconnect it.

1-47

«
...
51
52
53
54
55
...
»

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Reviews:

No comments