Cadillac 2006 Escalade EXT Owner'S Manual Download Page 413

Page: 413 / 484

Store the tire under the rear of the vehicle in the spare
tire carrier. Use the art and text following to help you:

A. Spare Tire (Valve

Stem Pointed Down)

B. Hoist Assembly
C. Hoist Cable
D. Tire Retainer
E. Hoist Shaft
F. Hoist End of

Extension Tool

G. Hoist Shaft

Access Hole

H. Wheel Wrench
I. Jack Handle

Extensions

J. Spare Tire Lock

(If Equipped)

1. Put the tire on the ground at the rear of the vehicle

with the valve stem pointed down and toward the
rear of the vehicle.

2. Tilt the retainer

downward and through
the wheel opening.
Make sure the retainer
is fully seated across
the underside of
the wheel.

3. Attach the wheel wrench (H) and extensions (I)

together.

5-97

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Escalade EXT

Reviews:

Cadillac 2006 Escalade EXT, Owner'S Manual, Page: 413 / 484

Search results

Summary of Contents for 2006 Escalade EXT

Reviews: