Cadillac 2006 Escalade EXT Owner'S Manual Download Page 374

Page: 374 / 484

2. Remove the

two screws from the
taillamp assembly.

3. Remove the taillamp assembly.

4. Press the release tab and turn the bulb socket

counterclockwise to remove it from the taillamp
assembly.

5. Pull the bulb straight out from the socket.

6. Press a new bulb into the socket, insert it into

the taillamp assembly and turn the bulb socket
clockwise until it clicks.

7. Reinstall the taillamp assembly and tighten

the screws.

Replacement Bulbs

Exterior Lamp

Bulb Number

Back-up Lamp, Rear Turn Signal,
Stoplamp and Taillamp

3157K

Daytime Running Lamp (DRL)

4114K

Front Turn Signal Lamps

3157AK

High-Beam Headlamp

9005 or 9005 LL

Sidemarker Lamp

194

For replacement bulbs not listed here, contact your
dealer.

5-58

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Escalade EXT

Reviews:

Cadillac 2006 Escalade EXT, Owner'S Manual, Page: 374 / 484

Search results

Summary of Contents for 2006 Escalade EXT

Reviews: