Cadillac 2006 Escalade EXT Owner'S Manual Download Page 327

Page: 327 / 484

Hood Release

To open the hood do the following:

1. Pull the handle with

this symbol on it. It is
located inside the
vehicle to the lower left
of the steering wheel.

2. Then go to the front of the vehicle and pull up on

the secondary hood release located near the
center of the grille.

3. Lift the hood.

Before closing the hood, be sure all the filler caps
are on properly. Then pull down the hood and close
it firmly.

5-11

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Escalade EXT

Reviews:

Cadillac 2006 Escalade EXT, Owner'S Manual, Page: 327 / 484

Search results

Summary of Contents for 2006 Escalade EXT

Reviews: