Cadillac 2006 Escalade EXT Owner'S Manual Download Page 410

Page: 410 / 484

5. If the spare does not lower, turn the wrench

counterclockwise until approximately 6 inches
(15 cm) of cable is exposed.

6. Stand the wheel blocks on their shortest ends,

with the backs facing each other.

7. Place the bottom edge

of the jack (A) on the
wheel blocks (B),
separating them so that
the jack is balanced
securely.

8. Attach the jack handle, extension, and wheel

wrench to the jack and place it (with the wheel
blocks) under the vehicle toward the front of the
rear bumper.

5-94

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Escalade EXT

Reviews:

Cadillac 2006 Escalade EXT, Owner'S Manual, Page: 410 / 484

Search results

Summary of Contents for 2006 Escalade EXT

Reviews: