Cadillac 2006 Escalade EXT Owner'S Manual Download Page 398

Page: 398 / 484

Removing the Spare Tire and Tools

The jack and wheel blocks are located under a cover
near the passenger side rear seat.

To remove the jack and wheel blocks, do the following:

1. Remove the jack cover by turning the two wing nuts

one-quarter turn counterclockwise and pulling the
jack cover off.

A. Wheel Blocks
B. Knob
C. Wing Nut
D. Retaining Hook

E. Jack
F. Jack Head
G. Mounting Bracket

2. Release the jack (E) from the mounting bracket (G)

by turning the knob (B) on the jack counterclockwise
to lower the jack head (F) from the mounting bracket.

Rear Seat (Passenger’s Side) Jack Cover

5-82

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Escalade EXT

Reviews:

Cadillac 2006 Escalade EXT, Owner'S Manual, Page: 398 / 484

Search results

Summary of Contents for 2006 Escalade EXT

Reviews: