Cadillac 2006 Escalade EXT Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 484

Cadillac 2006 Escalade EXT Owner'S Manual Download Page 31

Rear Safety Belt Comfort Guides

Rear shoulder belt comfort guides may provide added
safety belt comfort for older children who have outgrown
booster seats and for some adults. When installed on
a shoulder belt, the comfort guide positions the belt
away from the neck and head.

There is one guide for each passenger in the rear seat.
Here is how to install a comfort guide and use the
safety belt:

1. Remove the guide from the storage clip on the side

of the rear seatback.

2. Place the guide over the belt and insert the

two edges of the belt into the slots of the guide.

3. Be sure that the belt is not twisted and it lies flat.

The guide must be on top of the belt.

1-25

«
...
29
30
31
32
33
...
»

Summary of Contents for 2006 Escalade EXT





































































































































































































































































































































































































































































































Reviews:

No comments